山东导轨式升降货梯定做厂家

如果遇到电缆桥架发生故障对于我们来说是丈二的和尚摸不着头脑，压根不知道该如何面对这种情况，今天山东电缆桥架的专业人员就来为大家解决这个大麻烦。

If there are any cable tray failure for us is zhang two monks confused, don't know how to face this kind of situation, shandong cable bridge professionals today is to solve the trouble for you.

山东电缆桥架

Shandong cable tray

Relative to the bridge we usually find fault problems if points, and then take out one by one to solve, general professionals can take on a method to solve the fault:

对故障电缆释放一个不大于 20—160V 的低压脉冲，紧接着释放一个足以使线芯绝缘故障点发生闪络的高压脉 冲，同时触发释放第 2 个低压脉冲，如果故障点的电弧未熄灭那么相对于低压而言是完全短路这是我们采取的第一个方法二次脉冲法；

For releasing a cable fault is not more than 20, 160 v low voltage pulse, and then release a enough to make the wire core insulation flashover failure point of high voltage pulse, triggering the release of the second low voltage pulse at the same time, if the fault point arc burning then relative to the low pressure is completely short circuit this is the first method we adopt the secondary pulse method;

利用故障点瞬间放电产生的多次反射波完成故障排查，利用高压电作用进行故障点的发电。这种方法被俗称为)闪络法，它的适用范围非常的广泛。

Using multiple reflection waves of instantaneous discharge generated complete the troubleshooting of the fault point by using the high voltage function to generate electricity. This approach is known as) flashover method, its scope is very broad.

另外的一种方法就是将直流负高压输入 设备，然后对高阻故障点进行处理，使故障点产生电弧放电，这样需做的目的就是实现绝缘介质碳化。由丁碳化连接点为低电阻，直接促使高阻 故障转化为低阻故障。然后再应用低压脉冲法就可以测出故障点。这就是俗话说的烧穿故障点法。

Another method is to dc negative high voltage input devices, and then to deal with high impedance fault point, the point of failure to produce arc discharge, so need to do is to realize the purpose of the insulating medium carbide. Directly prompted by carbide connection point for low resistance, high resistance fault into low resistance fault. Then the low voltage pulse method can detect point of failure. This is as the saying goes, burn through the fault point method.

微法传输原理来监测传输线路的驻波谐振现象， 对产生故障的电缆进行测距，这就是传说中的驻波法。

Micro transmission principle method to monitor the transmission lines of standing wave resonance phenomenon, to range of malfunction of the cable, this is the legendary standing wave method.

相信对于我们的山东电缆桥架

的故障分析及解决措施有一定的认识，那么我们就走进山东电缆桥架厂家去体验不一样产品。

For us to believe that shandong cable tray failure analysis and solution have a certain understanding, so we went into shandong cable tray to experience different products.